Pixelation/dithering/banding issues on images

  • Nancy is right about the resizing. I was able to recreate the banding by saving at lower sizes... Starting from the left, a low quality of 3, the middle set to medium with a quality of 7 and the right with a maximum quality of 12. Why it occurs in your brush I am not sure of...


  • @mattramsey

    So? Any luck with the "blending issue" ...I am hoping and anxious to hear that all is solved -

    Another thing occurred to me is that maybe you messed with the fill opacity of the layer? not just the opacity opacity of the layer - I just noticed right now that there are 2 settings for the layer - and I've never messed with the fill opacity before. Supposedly you can use this instead of opacity, if you don't want to reduce the opacity of any effects applied to the layer. neat.

  • @Bobby-Aquitania 16 x 22 res 300 dpi

  • @Nancy-Gormezano said:

    If I understand: You have 2 problems 1) banding, artifacts & 2) blending

    As for banding:

    If you are originally working in 8 bit color, you are working with 256 colors, 256 levels of value, 256 levels saturation (2^8=256 ) - changing to 16 or 32 bit doesn't help at first - PS cannot invent new colors, sat, value. BUT if you start out, or continue in 16 or 32 then you have 2^16 or 2^32 available.

    I do not know what your workflow is. You might be getting banding because of working with jpegs. Jpegs are lossy compression. So every time you save into jpeg you compound the problem, your artifacts build up. Tga's and PSD files are lossless - ie NO compression. Use them, but create a jpeg version only when you upload to the web. Always work with the tgas and psd files for continuing your work.

    The other thing you may be doing is resizing your images, layers? If you are resizing to a larger size - you will introduce artifacts. You should work with smart objects instead, especially if you are resizing up and down. Smart objects will help that. I don't resize a layer, if I know I will want the larger resolution at a later time.

    Introducing noise into your already banded images will break up the banding. But so will painting. Using noise for banding is typically done with photos, only because of sensor technology. Banding is not a problem I have when painting - unless I have used a filter which reduces the colorspace. I don't know what filters you might have used.

    As someone also said previously - it could also be your monitors resolution, calibration not being set correctly?

    As for # 2 - In a previous post above, I already covered painting into a blank layer, to HIDE the dark pixelated areas, (or blending as you call it). When you paint on a separate layer it will not blend the pixels on lower layer. You are just using the layer technology to mix/obscure with the layers below.

    So sorry - I have no new info here on that subject, without increasing opacity of brush as well as FLOW. I know you said you increased opacity, but have you tried increasing the flow? AND choosing a color that is lighter, slightly different than the one below? If your monitor (or eyes) are not calibrated, you may not be seeing the differences in value, tone, color, saturation, even if there is "paint" in the top layer

    I THINK the issue may have to do with multiply layers.

    I don't usually paint on jpgs. It was just another thing I tried to show that it seemed as if the file itself was some how "corrupted". In theory using something like a soft airbrush should give a nice blend. And it does--but ONLY in certain areas of the picture. Which is weird. Those dark areas with the banding artifact it does nothing. No matter the opacity or flow.

    I'm not doing a lot of resizing images/layers. After I get the initial sketch and start painting I don't do any.

    I've tried switching from 8-bit to 16-bit and that doesn't help.

    I'm sorry but I'm still not sure I 100% get what you are saying about blending. Say I have one layer (and say it's just a normal layer)--I can paint/blend on that no problem. And if I create a new layer on top of it I can paint and blend the with the colors of the bottom layer without really changing anything on the bottom layer until I merge them.

    This is how I've always done it and I don't have any trouble 99% of the time.

    However, if I put a multiply layer on top and paint--the layer takes whatever color I originally chose and makes it darker (as it should) but SOMETIMES it seems to cause this artifact. Maybe if I started off in 16-bit it wouldn't do that. I'll have to try it sometime (but that really would make the files huge and my computer would probably lag).

    As a test I added more and more multiply layers to that image and the effect got worse and worse.

    I just wish that wasn't the case since multiple layers are so useful!

  • But here is the other thing: why is the file "corrupted"?

    Shouldn't I be able to flatten the image, save it as a jpg or tiff or whatever, and then paint over it? When I try that the pixel artifacts remain (on lower brush opacity no amount of brush work affects the area--it's as if I'm painting with nothing--whereas other parts of the image still respond; on higher opacity the pixels get "pushed around" into different weird patterns but it is impossible to achieve a nice blended effect).

    It is truly bizarre.

  • SVS OG

    @mattramsey If you want, I could try opening up the file on my computer and see if I run into the same issue.

  • @shinjifujioka said:

    @mattramsey If you want, I could try opening up the file on my computer and see if I run into the same issue.

    Sure! Should I email you the PSD file? Message me your contact info if that works for you. Or I can save the file in some format and post it here. There would be a lot of loss there but I am not sure it will matter if I'm right in thinking the image is some how broken.

    P.S. I like your new blog home page. great image.

  • @shinjifujioka You need to do something. You need to take your Helmet and Hound images to some ADs and request that they pair you up with an author who can write (or has written) a children's book about a kid struggling with sadness.

    It would be awesome and any rep who didn't jump on it asap would be the world's biggest fool.

    Seriously, this stuff of yours is so good. I'm a little angry I can't buy this book on Amazon right now!

  • I echo that sentiment, his work is incredible...

  • Note to everyone: Shinji tried working on the PSD file of this image and was able to tweak it a little by changing it to 16 bit but ultimately the banding was still there.

    I guess this is just a thing I'll have to try and work with/minimize the best I can.

    Thanks for all of your help/input!

  • @mattramsey Thanks for the update. I was thinking about suggesting testing on a copy. 1. test the space, since that area is giving you problems and not the sand area what happens if you delete and paint from scratch. 2. Copy and paste just that square of space into a new file and see what happens there. 3. Play with the type of files you are saving it as. Good luck troubleshooting.

Log in to reply