Photoshop brush/eraser lag
Hey all. So I think I have a pretty good pc setup and I recently upgraded my graphics card and RAM but I'm having lag issues in Ps. I have stayed at Ps version 19 because the brush lag in version 20 makes working impossible. Since upgrading my pc, my brush lag isn't as bad as it used to be but the eraser lag is driving me nuts. I'll erase and it will stop, give me the rotating circle, catch up on erasing and then switch to brush and scribble where it should have been erasing. Here's what I'm using:
Windows 10 64bit
Photoshop CC (v 19.1.7)
Wacom Cintiq 22 HDT with stock pen
Intel i7-4770 CPU @3.4GHz
GeForce RTX 2060
I should also mention I'm using a Kyle Webster brush and eraser. I tried turning off smoothing but that didn't help. Oh and besides lag, my brush tilt falls off every time I switch between Ps and another window. To turn it back on I have to go into the Wacom utilites and turn off "Use Windows Ink" and then turn it back on. Every.Single.Time.
It's all really frustrating. Is it just me?
NessIllustration Pro last edited by
@Lydia-M I'm having the same problem! I don't know if Kyle's brushes are THAT much of a burden on the computer system, but it wouldn't surprise me. I have a decent setup as well which my boyfriend built for me, and when he opened the task manager and saw how much juice Photoshop alone was taking on my memory, he choked! He says it's more than a very big video game haha... It's also worthy of note that before my boyfriend upgraded my computer, I didn't have a graphics card and Photoshop was "adapting" to that, taking less juice. When I upgraded, Photoshop also started taking twice as much memory as it used to before! So even upgrading might not always be a solution, it seems that can use more if you give it more. I still haven't found a solution though, but I've noticed certain Kyle brushes don't lag as much as others and it also lags less when you're working on a smaller canvas (although that's not always possible..) I figure some brushes must use a lot of particles or other heavy effects (randomly generated shapes, transparency, etc) and cause them to be more difficult on the system than others. I would love to hear what others have to say about this and if you have a solution.
Heather Boyd last edited by Heather Boyd
@Lydia-M I have this same issue, especially for more textured brushes. Either I have to draw incredibly slow or really quickly and sit back and have a tea and cookie till it finishes lols. It is very frustrating. I will be happy with a solution too. I have PS6 on a few year old windows 10 acre computer, with a Wacom intuous (not the newest model).
I have some lag on heavy textured brushes but for the most part I don't see much of an issue. I have a first generation surface book with only 8GB memory. Check the performance settings in photoshop. Here is a screen shot of mine.
TL;DR - The top solution would be to limit brushes that run slowly. If you can use a standard brush fine with no problems, but a custom brush is taking forever - it's the brush.
There is a lot that goes into this, but basically brushes with a lot of randomization and effects will max out your processors. Upgrades to things like RAM are always good, but the main issue on issues like this are normally processing bottlenecks while crunching the complicated math for randomization and effects.
The best place to upgrade for this are your video card and processor. Of course these are normally the two most expensive components. Unless you've bought an upgraded video card, this is almost certainly your weak link. The on-board cards that come with most systems are very weak and share RAM with the rest of the system. If you want to reduce lag this is where I'd start. (Note: This is not an option on laptops.)
Unfortunately prices on video cards are currently higher than usual due to them being the best way to farm crypto currency (because they are good at that randomization math we need). My card is actually more expensive now than when I got it right after release over a year ago. Go figure.
That said, I have a fairly pimped out gamer rig and still experience lag with some fancy brushes. I typically just limit laggy custom brushes as much as possible.
I have a brand new RTX 2060 and can run games like Monster Hunter World and Anthem (I know Anthem has its own performance issues) just fine. I set Ps to use the GPU. I opened the task manager performance panel while working and the CPU spikes between 12-16%. GPU is spiking at 2%? I made the brush 500px and it lagged so hard during that test. I'm so confused. I can't upgrade my CPU right now. Too much $ and I'd like to get a new board at the same time because they're both a couple years old now.
And I really don't want to switch my brush That's absurd if I can run a graphics heavy online video game but one brush stroke doesn't work. Is this a Windows 10/ Wacom/ Adobe issue?
I missed that in the specs. I agree that when we can play games at 60+ fps it seems crazy to get brush lag during painting. Running a GTX 1070 myself and get similar issues.
I happen to be playing with brushes today anyways and am watching Lee's video on the subject right now. He just mentioned that "high definition brushes with low spacing" cause the lag. It's right around 26:45 in the Photoshop Brushes class that he mentions it.
It really should spike out the GPU if it's an information issue, but I have the same problems on Clip Studio Paint or Photoshop (so it's not just the software). Happens with my drawing tablet, or even the mouse on my PC. Happens on my Windows Ink laptop.
The only common link I can determine is brush settings. Not sure why the bottleneck is there from a technical standpoint, but some brush settings just don't work right and need to be avoided.
sigross last edited by
@Lydia-M try downloading CPU-Z and GPU-Z free software for a detailed view of how your resources are being tested. You're better off upgrading your memory than graphics card. Photoshop doesn't really use the graphics card when drawing 2D - it's used in 3D rendering or illustrator uses the graphics card. Photoshop loves pumping the CPU and RAM. Use an SSD hard drive as a scratch disk for fast saves, the M.2 SSD drives are defo more reasonable now and save files in milliseconds. Make sure your scratch disk isn't the same disk that you launch the software from or you'll defo have performance problems. I have Crucial Vengeance LPX 32GB (3200 mhz) RAM. Best to use the fastest RAM your processor can handle. The i7 processor is great so I don't think that's the issue.
Also, if you have a lot of layers going on then lots of memory is your best friend.
@Lydia-M drop your cache level down to 3 and push your memory up to like 65% and see if that helps.
This optimization page from Adobe might help. It's a pretty long list of things you can try to squeeze out extra performance. Photoshop does use the GPU for many features. It's getting better and better at utilizing them.
I don't see it mentioned in there, but you may also try turning off smoothing on your brush. I've had that work with some, but not all, brushes that have bad performance.
The important question is whether or not it's just certain brushes. If most brushes work and a few don't: I personally call that a brush issue. I usually just skip the custom brushes that lag. If the brush overpowers an i7, 24 gigs of RAM, SSD, and a GTX 1070, I'll just use another.
If you REALLY love the brush then take the time to play with every setting (including the resolution of the "brush tip"/texture) and see if you can find what's causing the lag. Just hope that whatever it is doesn't "break" the brush.
If all, or most, of your brushes are lagging then it's probably a performance or bug issue. There were some bugs with Wacom's and Windows 10 creators edition IIRC. Might want to Google those if it is a persistent issue across brushes.
Thanks for all the input on this. I tried changing some settings on my own and switched between the current version and an older version but I was still having the lag issues. Yesterday I went through a troubleshooting session with an Adobe rep via chat and screenshare. After all that I thought the problem was fixed but later it happened again - some strokes didn't appear and then it would all catch up after a few seconds. It's not happening as often but it's still a problem. The fact that all the performance settings were changed, and I can play video games without any issues, leads me to believe its something happening between Wacom, Windows Ink and Photoshop. Next I'm going to try troubleshooting with someone from Wacom. I'm also considering dumping Photoshop.
@Lydia-M I'm working with a Mac, but I had a really horrible lag as well. What ended up working for me was to turn off Rulers in Photoshop. That cleared everything up. Hope this helps.
@Lydia-M Turn off the Windows Ink and see if that helps. It could be the drivers fighting over each other.
@Lydia-M I think you'd love Clip Studio I've been a Photoshop guy a long long time...but been really getting into Clip Studio and learning all the new stuff you can do with it and downloading a lot of nice brushes and reference. If I get use to coloring in it the only thing I'll even use Photoshop for setting up my files and exporting.
ThisKateCreates last edited by
@SketchyArtish Seconding the Clip Studio love if you ditch PS.
Lydia M last edited by Lydia M
I'm going to try Clip Studio right now. This is what I've tried so far in Photoshop and despite everything I'm still getting brush lag + my document will stop responding when I switch tools and crash Photoshop. I also hate that when I use a small brush size my cursor gets circled and then it brings up a brush selection menu. I think that's Windows Ink doing that but I can't turn it off.
Turned off rulers
Turned off Windows Ink (when off it kills my brush tilt and the brush stroke looks bad so I have to leave it on)
Turned off "Use GPU" was the weirdest change made by tech support
Tech support also went through my preferences and changed lots of other things but I can't remember
Update I also tried turning off Windows Ink and placing a PSUserConfig.txt file into a Photoshop settings folder so that my pen pressure would still work. The pen pressure works with Windows Ink turned off however it's laggy as heck so still not a solution for me.
@Lydia-M Sorry nothing seemed to work. You certainly made a thorough attempt at finding the issue! The transition from PS to CSP is not too bad. It has a lot of the same features. There are a few minor things they could do better, but overall I do enjoy it over PS for drawing. If you like it and are willing to wait, they do 50% off sales pretty often. I know they always do valentines day, which just passed, but I'm not sure when the next one will be.
If you want a pile of custom brushes for a good price check out Frenden's Brush Pack. It's over 800 brushes for just $15. I will say that a few of them have lag, but with over 800 to choose from it's easy to skip a bad one here and there. You can also download free brushes, models, scenes, etc. inside the software which is really cool. Good luck!
Thanks for the info @SketchyArtish. I started the 30 day trial yesterday. I was happy with the speed but unhappy with the stock pastel brushes because they looked very digital. The Kyle pastel brush I always use in photoshop is a tall rectangle shape that tilts. I don't know if I'll be able to find or make something similar in clip studio
@Lydia-M You can make a brush do just about anything in Clip Studio. Unfortunately, it looks like Kyle makes his brushes exclusively for Adobe so it's not possible to use his exact one. However, on twitter Kyle actually said this about the Frenden brushes I already recommended:
Perhaps, but not for Clip Studio. @Frenden makes the best brushes on earth for that software, so I would be wasting my time.